R - Semi - Circle Micron Filter Bags , Nylon Filter Bag Welded With Plastic Ring

20-2000 micron rated Nylon filament bag filters welded with plastic ring


The NMO nylon mono filament mesh filter bag used for the absolute accuracy of the surface.They use of the a single fiber mesh filter made of woven textiles.Non-deformation of the fiber in accordance with the textile design into a specific network, and increase fusion welding to increase its strength.To filter impurities trapped in the material surface direclty.Absolute precise surface filtration, absolute rating filtration material , single filament fiber structured non deformed fiber . The advantage is the filtration net can be reused after using and low consumption. Such type of sieve mesh is 25,37,50,80,100,150,200,250,300,400,600,800 and 1200 microns.

20-2000 micron rated Nylon filament bag filters welded with plastic ring Features
Seam treatment: ultrasonic welded or thread stitched
Seal ring options: Polypropylene or polyester SDS, STS, Zinc coated steel or stainless steel snap fit rings.
Ring attachment: Ultrasonic welded or thread stitched
Micron range:1,3,5,10,25,50,75,100,125,150,200 micron are available.
Efficiency: Nominal rating, 85% contaminant particle retention efficiency with a single pass.
Surface treatment: Fiber migration and extractable free glazed media surface treatment.
Media grade: Exclusively FDA compliant media , silicon free, and oil free.
Optimum replacing pressure differential 0.10 Mpa, Max 0.18 Mpa
Broad chemical compatibilities.

TechnicalSpecifications

Chemical Compatibility

Micron/Mesh Conversion Table( Nylon /NMO)

20-2000 micron rated Nylon filament bag filters welded with plastic ring Applications:
Auto coating & paint
Water purification& processing
Pharmaceutical
Food& beverage
Bulk &fine chemicals
Electronics

20-2000 micron rated Nylon filament bag filters welded with plastic ring  Shipping way &Package details :

By sea / air / express

Shanghai / Ning Bo/Tianjin

Carton Box Dimension: 40cmx50cm x60 cm
Gross weight: 12 kgs per box
Qty inside: 100 pcs P1S

How to replace the filter bag

1. Change-out Pressure Differential: The recommended bag filter change-out pressure differential across the bag media is 0.10MPA ( 15 PSI). Continuing beyond this point will result not only in rapid flow rate reduction and contaminant unloading, but also increase the risk of filter rupture. The max differential pressure allowed is 0.23 MPA( 35PSI).

2. Removal of use filter: During operation, the filter media many be embedded into perforated on the basket under excessive pressure, making it difficult to remove the bag filter.When this happens, don’t use excessive force to pull the bag, as it will break the ultrasonic welding line and detach the seal ring form the bag body. To safely remove the bag, shake the basket rapidly and then use a spine motion to separate the bag from the basket, slowly pull the use bag filter out.