Nylon Mesh 5 Micron - Open Area %: 1 - Width: 45 in
Nylon Mesh 5 Micron - Open Area %: 1 - Width: 45 in Resistant to common solvents and to alkalies but are attacked by strong mineral acids. Good abrasion resistance and low coefficient of friction. Working temperature is typically around 239F (115C). E
Nylon Mesh 5 Micron - Open Area %: 1 - Width: 45 in
- Resistant to common solvents and to alkalies but are attacked by strong mineral acids.
- Good abrasion resistance and low coefficient of friction.
- Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).
- Water absorption is very high.
- Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed.
5 Micron Nylon Mesh Technical Information
Mesh Opening: 5 micron
Open Area: 1 %
Thread Diameter: 37 micron
Weight (lbs): 0.11 lbs/yd^2
Weight (oz): 1.8 oz/yd^2
Weight (g): 60 g/m^2
Thickness: 100 micron
Width: 45 inch
Length: All mesh are sold in Yards.
Material: Nylon
Specific Gravity: 1.14 g/mm^3
Tensile Strength: 41.67 daN/mm^2
Stability to light: Poor
Abrasion resistance: Good
Acid resistance: Limited-Poor
Alkaline resistance: Good
Stability to solvents: Limited
Hydrolysis resistance: Good
RELATED PRODUCTS
RELATED ARTICLES
Tags: