Small Rolled Screen Printing Squeegee 50mm Width 9mm Thickness Multi Color

Small Rolled Screen Printing Squeegee Detailed Product Description Brand:: Fimor Model:: 50*9 50*7 Width:: 50mm Thickness:: 9mm Length:: 3.06M/3.66M Hardness:: 55 - 90 Color:: Green, Red, Blue, White, Brown Fimor silk screen scraper silk screen scraper sc

Small Rolled Screen Printing Squeegee Detailed Product Description

Brand::	Fimor	Model::	509 507
Width::	50mm	Thickness::	9mm
Length::	3.06M/3.66M	Hardness::	55° - 90°
Color::	Green, Red, Blue, White, Brown

Fimor silk screen scraper silk screen scraper scraping strip ink scraper 55-90 degree flat mouth oblique mouth

Product Name	Screen Printing Squeegee
Product size	5093660 4073660 3553660 3093660 2553660
Product hardnesss	55, 60, 65 degrees (red) 70 degrees (white) 75 degrees (green) 80 degree (white) 85 degrees (blue) 90 degrees (brown)
Knife shape	flat , sharp, oblique
Product use	The strip used in screen printing enables ink to flow through the screen and form a pattern on the substrate.

Selection of Small Rolled Screen Printing Squeegee hardness

1, soft rubber scraping. Soft squeegee is generally used in the beginning of printing pressure, with large mesh opening and low ink viscosity. Soft squeegee is the best choice for printing irregular objects and printing on uneven printing platforms. Using soft rubber scraping printing, the amount of ink adhesion is large, and the fineness of the printed image is moderate, which is generally used for large-area printing and glass and ceramic printing. The hardness of a soft squeegee is generally 65 degrees.

2, medium hardness scraping. When the printing pressure is large, the medium hardness squeegee is used, and any mesh screen and various inks can be selected for medium hardness squeegee printing. Using medium hardness squeegee printing, the ink adhesion is large, the image resolution is high, and it is suitable for printing various types of substrate materials. The hardness of the medium hardness squeegee is generally 65-75 Shore.

3, hard rubber scraping. When the printing pressure is the highest and the ink viscosity is high, use a hard rubber scraper. The amount of ink attached is small, and the image resolution is quite good. Usually, fine screen printing can be selected for fine screen printing, and the ink layer printed is very thin. Hard rubber scraping hardness is generally 75-85 Shores.

Screen Printing Squeegee MK-PU300

Small Rolled Screen Printing Squeegee instructions:

Cleaning: Wipe off excess ink and clean it with a soft cloth dampened with a suitable solvent. Do not use strong solvents, especially ink thinners, to clean the squeegee. The squeegee should be left idle after grinding or before use to completely evaporate the solvent.

Grinding: It can be ground in a general way: belt type, roller type, knife cutting type can only grind dry squeegee. After grinding, it can't be wiped with solvent immediately.