Waterproof Inkjet Film 8.5 x 14

Waterproof Inkjet Film 8.5 x 14 
 

A fast drying “waterproof type” film for Inkjet printers that satisfies the needs of the most demanding silkscreen printer, at a surprisingly affordable price. A 5 mil polyester based film.

• Its UV densities easily match those of silver films
• Works great with either pigment or dye-based ink
• As always, product satisfaction is guaranteed
• Always use high resolution images for best results - 1440dpi for line images, lower is ok for halftone work
• Make sure you have the film loaded correctly
• Be sure that the coated side will be face-up under the print head

Settings - always use the highest resolution you can

• This will often be determined by how fast you want the film to image
• The higher the resolution the slower the image speed

Ink Density - adjust the amount of ink to ensure maximum density while still drying

Drying time - in most cases the ink will be touch dry as the film comes out of the printer

Dry Emulsion - Ensure that your emulsion has fully dried before attempting to expose. The image on the film will be damaged if the emulsion is still wet or tacky

Film Storage - to re-use the film it is best stored with clean paper between each sheet of film. Store in a dry environment

film Inkjet Film

Pre：Waterproof Inkjet Film 17＂ x 100'

Next：DTF pet film roll for digital printing